ATC (Air Traffic Control) monitors our skies, sending out a beacon signal to locate and identify all the aircraft in the area. This signal is transmitted at 1030 MHz. Aircraft transponders reply in kind with a signal containing all of the aircraft’s information.
At the same time, on another frequency (1150 MHz?), aircraft in the area are sending out DME (Distance Measuring Equipment) signals to radio towers to calculate distance.
If the transponder on your aircraft is off frequency, it could begin to respond to the DME signal from other aircraft and reject the beacon from ATC.
The ATC will not have any information about your aircraft if your transponder is responding to the wrong frequency and rejecting the ATC signal. You will show up as an intermittent blip on radar. They will know something is there, but won’t have accurate information. They will let you know you have a bad transponder signal. Other aircraft in the area will not be able to see you either.
Over time, a transponder will drift off frequency because radio filter grounds become oxidized. We see this on about 90% of the TDR-94/94D transponders in our shop. We are able to fix this by cleaning the grounds on the shield.
If you have any questions about this squawk or other questions about your TDR-94/94D, including the upgrade required for ADS-B compliance, contact a Duncan Aviation Avionics Instruments Tech Rep.
Do I Need An Avionics Service Plan During Heavy Maintenance?
Do Not Delay. The Universal Avionics FMS GPS Rollover Software Update Is Only Months Away
Verifying and Aligning Aircraft Compass Systems: Essential Steps and Manufacturer Guidelines
Collins FMS Hints, Tips & Techniques: FMS Position Determination
Comparing Aircraft Maintenance Quotes: Avoiding Sticker Shock